Go to Main Content Go to Main Menu

Products

PRODUCTS INTRODUCTION

Electro Magnet

PRODUCT MAP VIEW

Scrap Magnet
Standard Type

FEATURE: Operation of various scrap that was designed to fit the job, such as scrap iron, steel scraps, pieces.

Scrap Magnet
Heavy Duty Type

FEATURE: Operation of various scrap that was designed to fit the job, such as scrap iron, steel scraps, pieces.

Scrap Magnet
Oval Heavy Duty Type

FEATURE: Operation of various scrap that was designed to fit the job, such as scrap iron, steel scraps, pieces.

Plate Lifting Magnet
Plate Lifting Magnet

FEATURE: HANMI TECHWIN lifting magnets for the transportation of steel plates provide accurate control of the number of plates lifted at time. They have an excellent lifting capability, rigid construction, and can stand up to hard usage ver...

Billet Lifting Magnet
Billet Lifting Magnet

FEATURE: This lifting magnet is used for handling long ferrous material. As the movable magnetic poles incorporated in the magnetic unit are designed to be capable of moving in and out, the lifting magnet is suitable for application where there...

Slab Lifting Magnet
Slab Lifting Magnet

FEATURE: This lifting magnet is designed for transporting ingots, slabs and very thick steel plates. As these kinds of materials cause relatively small gap between the surface of material and magnetic poles, small magnetizing force is of use....

Coil Lifting Magnet
Coil Lifting Magnet

FEATURE: These types of magnets are used for handling strip coils. In the up-end handling type, the coil is lifted by the magnet with the vertical coil axis. A special type of magnet is also available for use with the open coil annealing proc...

Wire-rod Coil Lifting Magnet
Wire-rod Coil Lifting Magnet

FEATURE: This magnet is used for carrying steel coil and it is manufactured by up-end handling which is adsorbed vertically & horizontally with the steel coil axis. HANMI TECHWIN's coil lifter facilities provide the environment to en...

Mag-Rail
Mag-Rail

FEATURE: This magnet is installed on conveyor line, and transports steel plates to the end of the conveyor so that the magnet easily lay up the plates on an arranged place, and puts them out as completed products.

Angle Lifting Magnet
Angle Lifting Magnet

FEATURE: As shape of pole is designed to fit angle shaped materials, this electromagnet is suitable for transportation of angle shaped steel materials.

Small Pot
Small Pot

FEATURE: This magnet is suitable for transportation of one thick or thin plate, and quantity of magnet must be chosen by the size of steel plate. For the thin steel plate, distance of over hang must be less than half the distance of two magn...

H-Beam & Bundle Magnet
H-Beam & Bundle Magnet

FEATURE: This magnet has been designed to penetrate deep into the shaped steels such as H-beams, channels, angles, etc., so that not heavy load gives much weight to the binding bands, preventing them from being ripped out. This magnet has su...

Bundle Bar Magnet
Bundle Bar Magnet

FEATURE: This magnet is suitable for carrying bundle products of reinforcing rod and is of strong magnetic force and rigid construction.

High Temperature Magnet
High Temperature Magnet

FEATURE: These Magnets are designed to handle maximun of 600℃ materials, and should be used for applications such as removing elevated temperature billets and rails from cooling bed and table at the end of forming or casting line. The design...

Accessories
Calbe Connector

FEATURE: Cable Connector is used to attach magnet electrical leads to power cables. Connector provides water proof while still allowing the cables to be quickly disconnected. Eash kit contains one male and one female connector. Two kits are r...

Accessories
Magnet Chains

FEATURE: The magnet chain.

Power Supply & Control System
Power Supply & Control System

FEATURE: 1. Power Supply System Silicon rectifier system : With this system, DC 220V is obtained by full-ware rectification of a single-phase or three-phase AC supply, using silicon rectifier. System is compact, light in weight, and easy to...